Back to Product Search

OE Oil Heater

Sectors

  • Energy
  • Engine

Product Categories

Hotstart's lube oil heaters thread into the engine’s oil pan to  keep the oil warm.

HOTSTART lube oil heaters thread into the engine’s oil pan to keep the oil warm. When cold, oil becomes very viscous and may not protect engine components. Upon start-up, warm oil is supplied to the critical wear points in the engine. This reduces engine wear and allows easier starts which prolong battery life.

These heaters, available in various AC voltages as well as 12 and 24 volt DC, range from 75 to 500 watts. The OE series of heaters are for hazardous location engine applications and come without a thermostat.  

If heating gear oil (medium weight viscosity), HOTSTART recommends using low watt density heaters. 

Can be used in hazardous locations.

  • CSA

Heating Information

Primary Heating

  • Lubrication Oil
  • Gear Oil

Primary Heat Power

  • 125 W
  • 150 W
  • 225 W
  • 265 W
  • 300 W
  • 375 W
  • 400 W
  • 500 W

Power Specifications

Power Sources

  • AC, Three-Phase, 50/60 Hz
  • AC, Single-Phase, 50/60 Hz

Voltages

  • 120
  • 208
  • 240
  • 277
  • 380
  • 480
  • 575

Power Connectors

  • Hardwired

Mount Types

  • Threaded

Certifications

  • CSA

Related Products

A UL C/US certified compact oil heating system designed to maintain an engine’s optimal oil viscosity for North America-front view.

HOTSTART’s OSE (UL C/US listed; Class 1, Div. 2, Group D, T3 or Class 1, Zone 2, Group IIA T3 depending on configuration) is a compact oil heating system for use in North American hazardous…

read more

Capable of providing a disconnection point and overcurrent protection when paired with hazardous location heating systems

HOTSTART’s explosion proof BB Breaker Box is capable of providing a disconnection point and overcurrent protection when paired with HOTSTART hazardous location heating systems for oil and gas…

read more

Hazardous location approved systems that are hard wired into the main electrical system.

HOTSTART’s EE heaters are hazardous location approved systems available in both single and three phase configurations that are hard wired into the main electrical system. The EE series features the…

read more

Metal cylindrical heater threads into an engine oil pan and warms up viscous oil, protecting critical components

HOTSTART lube oil heaters thread into the engine’s oil pan to keep the oil warm. When cold, oil becomes very viscous and may not protect engine components. Upon start-up, warm oil is supplied to the…

read more

Hotstart’s OLE is the largest capacity UL C/US oil heating system designed for hazardous locations in North America.

The OLE model (UL C/US listed; Class 1, Div 1, Group D T3 or Class 1 Zone 1 Group IIA T3 depending on configuration) is HOTSTART’s largest capacity oil heating system designed for use in North…

read more

UL C/US Systems designed for hazardous locations and designed to handle the largest engine heating applications.

The CLE model (UL C/US listed; Class 1, Div 1, Group D T3 or Class 1 Zone 1 Group IIA T3 depending on configuration) is HOTSTART’s large capacity coolant heating system designed for use in North…

read more

Hotstart’s largest capacity combination, IECEx oil & gas heating system designed for hazardous locations.

The OCLA model (IECEx certified) is HOTSTART’s largest capacity combination coolant-oil heating system designed for use in hazardous location applications. Its combination of heating power options…

read more

Hotstart’s OLA is the largest capacity IECEx oil heating system designed for hazardous locations.

The OLA model (IECEx certified) is HOTSTART’s largest capacity oil heating system designed for use in hazardous location applications. Its combination of heating power options (up to 24 kW) and pump…

read more

IECEx systems designed for hazardous locations and designed to handle the largest engine heating applications.

The CLA model (IECEx certified) is HOTSTART’s large capacity coolant heating system designed for use in hazardous location applications. Its combination of heating power options (up to 66 kW) and…

read more

A compact UL C/US heating system for use in North America to maintain  optimal engine temperatures-front view shown.

HOTSTART’s CSE (UL C/US listed; Class 1, Div. 2, Group D, T3 or Class 1, Zone 2, Group IIA T3 depending on configuration)  is a compact coolant heating system for use in North American hazardous…

read more

A compact UL C/US combination oil and coolant heating system for North American hazardous locations designed to maintain engine temp-front view.

HOTSTART's OCSE (UL C/US listed; Class 1, Div. 2, Group D, T3 or Class 1, Zone 2, Group IIA T3 depending on configuration)  is a compact combination oil and coolant heating system for use in North…

read more