Back to Product Search

OSX Oil Heating System Hazardous Location

Sectors

  • Energy
  • Engine

Markets

Product Categories

HOTSTART-OSE-OSX-Oil-Engine-Heater-HazLoc-Front
HOTSTART-OSX-Oil-Engine-Heater-HazLoc-Back

HOTSTART’s OSX (certified Class 1, Div. 1, Group D, CSA Standards with CSA approved components) is a compact oil heating system for use in North American hazardous locations and is designed to maintain an engine or compressor’s optimal oil viscosity for gas compressor or offshore equipment applications. To improve startability and availability, the OSX continuously circulates heated oil throughout the oil sump or lubrication system, maintaining a uniform and consistent temperature to ensure oil viscosity is at optimal levels for engine or compressor protection.

Continuous lubrication of the compressor frame, bearings and crossheads with heated oil minimizes wear and tear, reducing overall maintenance. The OSX delivers the required flow to achieve pressure permissives for startup, eliminating the need for a separate prelube pump, motor and controller. Designed as a user-friendly, pre-packaged system, the OSX includes all necessary components and features a foot-mounted configuration to reduce overall footprint. Its remote automatic function and customer interface connections enable the OSX to be easily integrated into any control system.

In oil and gas applications, improving equipment availability and maintaining system readiness are critical factors in reducing expenses and improving the bottom line. In cold climates, HOTSTART heating systems ensure immediate startup on demand even in freezing temperatures. In warm, humid climates, HOTSTART systems maintain equipment above the dew point, eliminating the risk of condensation forming inside the oil sump or pan.

Can be used in hazardous locations.

  • Class 1, Div 1, Group D, CSA Standards w/CSA apvd components

Heating Information

Primary Heating

  • Lubrication Oil

Primary Heat Power

  • 1.5 kW
  • 2.5 kW

Power Specifications

Power Sources

  • AC, Single-Phase, 60 Hz
  • AC, Three-Phase, 60 Hz

Voltages

  • 240
  • 480

Power Connectors

  • Hardwired

Temperature Control

Primary Temperature Control

  • 32–212°F (0–100°C), adjustable

Primary Temperature Control Set Points

  • 105°F (40°C), factory set

Primary High Limit Temperature

  • 195°F (90°C)

Mount Types

  • Foot

Inlets / Outlets

Inlets

  • Determined by flow rate

Outlets

  • 1” NPT

Ingress Options

Control Box Ingress

  • NEMA 4

Oil Motor Ingress

  • XPFC

Certifications

  • Class 1, Div. 1, Group D CSA Standards w/ CSA apvd components

Related Products

HOTSTART-OSE-OSX-Oil-Engine-Heater-HazLoc-Front

HOTSTART’s OSE (certified Class 1, Div. 2, Group D, CSA Standards with CSA approved components) is a compact oil heating system for use in North American hazardous locations and is designed to…

read more

HOTSTART-Breaker-Box

HOTSTART’s explosion proof BB Breaker Box is capable of providing a disconnection point and overcurrent protection when paired with HOTSTART hazardous location heating systems for oil and gas…

read more

HOTSTART-OCLE-Oil-Coolant-Engine-Heater-HazLoc

The OCLE model (certified for Class 1, Div 1, Group D) is HOTSTART’s largest capacity combination coolant-oil heating system designed for use in North American hazardous location applications. Its…

read more

HOTSTART-EE-Coolant-Engine-Heater-HazLoc

HOTSTART’s EE heaters are hazardous location approved systems available in both single and three phase configurations that are hard wired into the main electrical system. The EE series features the…

read more

HOTSTART-OE-Oil-Heater-Hazardous-Location

HOTSTART lube oil heaters thread into the engine’s oil pan to keep the oil warm. When cold, oil becomes very viscous and may not protect engine components. Upon start-up, warm oil is supplied to the…

read more

HOTSTART-OLE-Oil-Engine-Compressor-Heater-HazLoc

The OLE model (certified for Class 1, Div 1, Group D) is HOTSTART’s largest capacity oil heating system designed for use in North American hazardous location applications. Its combination of heating…

read more

HOTSTART-CLE-Coolant-Engine-Heater-HazLoc

The CLE model (certified for Class 1, Div 1, Group D) is HOTSTART’s large capacity coolant heating system designed for use in North American hazardous location applications. Its combination of…

read more

HOTSTART-OCLA-Oil-Coolant-Engine-Heater-ATEX

The OCLA model (IECEx certified) is HOTSTART’s largest capacity combination coolant-oil heating system designed for use in hazardous location applications. Its combination of heating power options…

read more

HOTSTART-OLA-Oil-Engine-Compressor-Heater-ATEX

The OLA model (IECEx certified) is HOTSTART’s largest capacity oil heating system designed for use in hazardous location applications. Its combination of heating power options (up to 24 kW) and pump…

read more

HOTSTART-CLA-Coolant-Engine-Heater-ATEX

The CLA model (IECEx certified) is HOTSTART’s large capacity coolant heating system designed for use in hazardous location applications. Its combination of heating power options (up to 66 kW) and…

read more

HOTSTART-CSE-Coolant-Engine-Heater-Front-HazLoc

HOTSTART’s CSE (certified Class 1, Div. 2, Group D, CSA Standards with CSA approved components) is a compact coolant heating system for use in North American hazardous locations and is designed to…

read more

HOTSTART-OCSE-Oil-Coolant-Engine-Heater-HazLoc-Front

HOTSTART's OCSE (certified Class 1, Div. 2, Group D, CSA Standards with CSA approved components) is a compact combination oil and coolant heating system for use in North American hazardous locations…

read more